+91-84477 12050
Vertical Turret Milling Machine STM NC Series IV-400
SKU
1000002798
- The machine is equipped with high speed and high-precision design mode.
- It is equipped with a heavy built quality.
- A large range of processing parts, high processing accuracy
- The machine has strong structure and low machine base.
Brand | S&T |
---|---|
Height | 2120 mm |
Width | 1900 mm |
Depth | 2087 mm |
X/Y/Z Travel | 830 / 380 / 355 mm |
Quill Travel | 127 mm |
Head Swivel Up Down | ±45 |
Over Swivel on Turret | 360,head_swivel_right_left±45 |
Spindle Nose To Table Surface | 100 - 506 mm |
Quill Feed | 0.04 - 0.08 - 0.14 mm |
Max. Table Load | 350 Kgs |
Transmission | Variable Speed (Opt. Inverter) |
Spindle Speed | 5000 rpm |
Spindle Taper | NST#30 / R8 |
Spindle Motor | 3HP |
Weight | 1,400.00 Kg |
- Spindle material is SCM415 full hardened through carbonizing heat treatment
- NST#30/R8 spindle with 3HP variable speed motor (inverter motor option is available).
- Spindle quill drive box is transmitted by ball screw for better precision.
- Essential castings are made of high grade of Meehanite cast iron, which has been stressed and relieved to provide a rigid machine structure.
- Standard with 10 X 54 table with hardened and ground.
- Table T-slot is precision ground to exact tolerance.
- Precision ball screws are equipped on X&Y axes.
- X and Y slide ways and gibs are coated with Turcite-B to provide smooth and wear resistant surface.
- 1:2 ratio timing belt pulleys on XY axes to increase drive torque.
Write Your Own Review
Login