- A high-precision machining machine with a high processing efficiency and high accuracy.
- It is equipped with a high speed and precision design mode.
- The table has been hardened and ground for heavy-duty work.
- It is a simple, well-built structure for easy operation.
|Spindle Travel||127 mm|
|Cross||395 mm (Square)|
|Arm Travel||520 mm|
|Spindle Nose To Table Surface||80 - 490 mm|
|Spindle Center To Column||140 - 500 mm|
|Low Range||66 - 4540 (50Hz) (16 Steps)|
|High Range||50 - 3900 (50Hz)|
|Quill Feeds Per Rev of Spindle||0.04 - 0.08 - 0.15 mm|
|Dia of Quill||Ø 86|
|Swivel Angle To Right Left||90°|
|Swivel Angle To Front Back||45°|
|Spindle Motor||2.2 kW 3PH or 3.7 kW 3PH|
- Meehanite casting with annealing and stress relieving treatment.
- Dovetail guideways of x, y, z axis.
- Turcite B coated on x and y guideways.
- Spindle is made from SCM-415 material with tempering treatment and precise grounded.
- Precision angular contract bearing on spindle (p4,7210) for high accuracy and heavy duty cutting.
- Hardened and ground on the xyz sideways and table T-slot.
- The one piece back gear housing with bearing is finish bored into the housing after installation, providing.
- the best alignment for quieter and more efficient operation on x, y, z axis, Flame hardened on topside.
- Centralized one shot lubrication system for ways, nuts and lead screws.
- Bearing support to the end of the motor.
- Quill Diameter 100mm
- Extra wide table working area 54 inch x 10 inch