- A high-precision machining machine that can process large amounts of material quickly and accurately.
- It has a high-speed and quality construction mode.
- For hard work, the table has been hardened and ground.
- It's a simple, well-built structure that really is simple to use.
|Spindle Travel||127 mm|
|Arm Travel||570 mm|
|Spindle Nose To Table Surface||80 - 466 mm|
|Spindle Center To Column||140 - 660 mm|
|Low Range||66 - 4540 (50Hz) (16 Steps)|
|High Range||50 - 3900 (50Hz)|
|Quill Feeds Per Rev of Spindle||0.04 - 0.08 - 0.15 mm|
|Dia of Quill||Ø 86|
|Swivel Angle To Right Left||90°|
|Swivel Angle To Front Back||45°|
|Spindle Motor||1.5 kW 3PH or 2.2 kW 3PH|
- Meehanite casting with annealing and stress relieving treatment.
- Dovetail guideways of x, y, z axis.
- Turcite B coated on x and y guideways.
- Spindle is made from SCM-415 material with tempering treatment and precise grounded.
- Precision angular contract bearing on spindle (p4,7210) for high accuracy and heavy duty cutting.
- Hardened and ground on the xyz sideways and table T-slot.
- The one-piece back gear housing with bearing is finish bored into the housing after installation, providing.
- the best alignment for quieter and more efficient operation on x, y, z axis, Flame hardened on topside.
- Centralized one shot lubrication system for ways, nuts and lead screws.
- Bearing support to the end of the motor.